The glass bottle factory must pay attention to the following problems in the production process of glass bottles:
Appearance inspection:
1. The glass bottle is smooth and clean, with or without bubbles, impurities, cracks and stains.
2. There is no mouth protrusion, mouth depression, no deformation of the bottle body, and no bottom protrusion at the bottom of the bottle.
3. The bottle seam is intact, without seam error, seam crack and seam thick and other phenomena
4. The thread of the glass bottle is uniform, and there is no thread breakage, deficiency, deformation, etc.
Specifications: 1. The outer diameter of the bottle mouth: 38.1±0.35m/2, the flatness of the glass bottle mouth: <0.3m/3, the full mouth capacity: 220±5m/4, the bottle height: 160±1.2m/5, the bottle Body outer diameter: 54.6±1.2mm, bottle inner diameter: 3.25mm, bottle outer diameter: 38.1±0.35mm, bottle body thickness>1.2mm, bottle bottom thickness>2.2mm
Post time: May-06-2022